Kona Macro 16 Channel Config with Chirpstack V3

Can someone help validate this configuration for a Kona Macro 16 channel gateway please.

Here is the SX1301 config on the KONA gateways :

        "SX1301_conf":[
        {
            "chip_enable": true,
            "chip_center_freq": 868000000,
            "chip_rf_chain": 0,
            "chan_multiSF_0": { "chan_rx_freq": 868100000, "spread_factor": "7-12" },
            "chan_multiSF_1": { "chan_rx_freq": 868300000, "spread_factor": "7-12" },
            "chan_multiSF_2": { "chan_rx_freq": 868500000, "spread_factor": "7-12" },
            "chan_multiSF_3": { "chan_rx_freq": 867100000, "spread_factor": "7-12" },
            "chan_multiSF_4": { "chan_rx_freq": 867300000, "spread_factor": "7-12" },
            "chan_multiSF_5": { "chan_rx_freq": 867500000, "spread_factor": "7-12" },
            "chan_multiSF_6": { "chan_rx_freq": 867700000, "spread_factor": "7-12" },
            "chan_multiSF_7": { "chan_rx_freq": 867900000, "spread_factor": "7-12" },
            "chan_LoRa_std" : { "chan_rx_freq": 868300000, "bandwidth": 250000, "spread_factor": 7 },
            "chan_FSK"      : { "chan_rx_freq": 868800000, "bandwidth": 250000, "bit_rate": 100000 }
        },{
            "chip_enable": true,
            "chip_center_freq": 863800000,
            "chip_rf_chain": 0,
            "chan_multiSF_0": { "chan_rx_freq": 863100000, "spread_factor": "7-12" },
            "chan_multiSF_1": { "chan_rx_freq": 863300000, "spread_factor": "7-12" },
            "chan_multiSF_2": { "chan_rx_freq": 863500000, "spread_factor": "7-12" },
            "chan_multiSF_3": { "chan_rx_freq": 863700000, "spread_factor": "7-12" },
            "chan_multiSF_4": { "chan_rx_freq": 863900000, "spread_factor": "7-12" },
            "chan_multiSF_5": { "chan_rx_freq": 864100000, "spread_factor": "7-12" },
            "chan_multiSF_6": { "chan_rx_freq": 864300000, "spread_factor": "7-12" },
            "chan_multiSF_7": { "chan_rx_freq": 864500000, "spread_factor": "7-12" },
            "chan_LoRa_std" : { "chan_rx_freq": 863800000, "bandwidth": 250000, "spread_factor": 7 },
            "chan_FSK"      : { "chan_rx_freq": 863800000, "bandwidth": 250000, "bit_rate": 100000 }
        }],

And here is what I have in the network server config:

[network_server.band]
name="EU_863_870"

[network_server.network_settings]

  [[network_server.network_settings.extra_channels]]
  frequency=867100000
  min_dr=0
  max_dr=5

  [[network_server.network_settings.extra_channels]]
  frequency=867300000
  min_dr=0
  max_dr=5

  [[network_server.network_settings.extra_channels]]
  frequency=867500000
  min_dr=0
  max_dr=5

  [[network_server.network_settings.extra_channels]]
  frequency=867700000
  min_dr=0
  max_dr=5

  [[network_server.network_settings.extra_channels]]
  frequency=867900000
  min_dr=0
  max_dr=5

  [[network_server.network_settings.extra_channels]]
  frequency=863700000
  min_dr=0
  max_dr=5

  [[network_server.network_settings.extra_channels]]
  frequency=863900000
  min_dr=0
  max_dr=5

  [[network_server.network_settings.extra_channels]]
  frequency=864100000
  min_dr=0
  max_dr=5

  [[network_server.network_settings.extra_channels]]
  frequency=864300000
  min_dr=0
  max_dr=5

  [[network_server.network_settings.extra_channels]]
  frequency=864500000
  min_dr=0
  max_dr=5

I can see that the device has handled the channel req mac commands and extended its channel range:

Are these extra_channels settings complete? Will they enable me to leverage all 16 available channels? Should there be a total of 16 channels configured in the extra channels?

I remember you need to add frequencies in Gateway Profile in v3 too.

It is working in v3 without the gateway config. You can see the additional frequencies have appeared. I’m trying to understand if my additional channel config in the server is complete given the channels rx_freq in the SX1301 config.