LoRa node with Raspberry Pi 3 B+ and Dragino LoRa/GPS HAT for Raspberry

Devices
1

Hello,

Has anyone tried to build a LoRa node using the Raspberry Pi 3 B+ and the Dragino LoRa/GPS HAT for Raspberry? I am not able to find any information about how to make this node work with the Chirpstack Gateway, and I am a bit lost. I have already the gateway and the servers up and running, and I need to build and configure the node.

Can anyone help me?

Thank you!

2

Have you found this link already? I did it with a RPi 2 and the Dragino LoRa/GPS Hat - you need to do some additional wiring (as described in the wiki)

3

Thank you for your help!

4

Hello if interested by RPi 4 + dragino RPi hat v1.4 + gateway (wtv) to make a GPS tracker over LoRa
check this

5

hi did you get this working as I have the same problem?

6

To have GPS Fix on Pi 3B+ a little trick do

On the RPi
And before power it remove TX GPS jumper
Power it connect to it

ntpdate ntp.ubuntu.com

Wait for 3d FIX and then replug TX GPS jumper
hope this help see my repo for more info